Introduction
Documentation
Syntax
This element does not appear in railML® 3.2 within the CO subschema. It is available only in railML® 3.1. There exists an element <generic:designator> that might have replaced it. Do not hesitate to contact railML.org for further questions.
Autoexport from the XML-Schema for element CO:designator of railML ® version 3.1 |
| Documentation
|
This element is not documented in the schema!
|
| Subschema
|
common
|
| Parents*
|
activatedBy,
activationCondition,
aspectRelatedDelay,
aspectRelation,
assetsForIL,
atpDevice,
balise,
border,
bufferStop,
combinedRoute,
command,
conflictingRoute,
controlledInterlocking,
controlledSystemAsset,
controller,
controlsInterface,
controlsSystemAsset,
controlsTrackAsset,
crossing,
crossingInPosition,
dangerPoint,
deactivatedBy,
delayBySwitchPosition,
derailerIL,
derailerIS,
derailerInPosition,
destinationPoint,
detectorInState,
distantAspect,
electrificationSection,
facingSwitchInPosition,
genericDetector,
givenAspect,
givenPosition,
givenPosition,
givenPosition,
givenState,
givenState,
givenState,
hasAspect,
hasConfiguration,
hasDetectorTypes,
hasElementGroupType,
hasLevelCrossingType,
hasPositionRestriction,
hasRouteType,
hasTVDresetStrategy,
implementsElementGroup,
implementsSignalplan,
interface,
itinerary,
key,
keyLockIL,
keyLockIS,
keyLockInState,
levelCrossingIL,
levelCrossingIS,
levelCrossingInState,
line,
loadingGauge,
localOperationArea,
masterAspect,
message,
movableCrossing,
operationalPoint,
overCrossing,
overlap,
overlapRelease,
permissionZone,
platform,
powerSupplyIL,
reasonForConflict,
relatedCrossingAndPosition,
relatedDerailerAndPosition,
relatedDerailerInPosition,
relatedDetectorAndState,
relatedLevelCrossingAndState,
relatedLockAndState,
relatedSectionAndVacancy,
relatedSignalAndAspect,
relatedSwitchAndPosition,
relatedSwitchInPosition,
requiredCrossingPosition,
requiredDerailerPosition,
requiredDetectorState,
requiredKeyLockState,
requiredLevelCrossingState,
requiredSectionState,
requiredSignalAspect,
requiredSwitchPosition,
requiresLevelCrossingInState,
requiresSwitchInPosition,
restrictionArea,
route,
routeActivationSection,
routeEntry,
routeExit,
routeRelation,
routeReleaseGroupAhead,
routeReleaseGroupRear,
serviceSection,
shuntingZone,
signalBox,
signalDelayTime,
signalIL,
signalIS,
signalWithAspect,
slaveAspect,
specificIM,
speedSection,
stoppingPlace,
switchIL,
switchIS,
switchInPosition,
switchPositionInDepartureTrack,
track,
trackBed,
trackGauge,
trainDetectionElement,
trainProtectionElement,
trainRadio,
tvdSection,
underCrossing,
weightLimit,
workZone
|
| Children
|
None
|
Attributes:
- register: name of a register where the designator entry can be found (obligatory;
xs:string),
- entry: the designator of the element in the specified register (obligatory;
xs:string)
|
*Notice:
Elements may have different parent elements. As a consequence they may be used in different contexts.
Please, consider this as well as a user of this wiki as when developing this documentation further.
Aspects that are only relevant with respect to one of several parents should be explained exclusively in the documentation of the respective parent element.
|
Changes 3.1→3.2
Removed with version 3.2. There exists an element <generic:designator> that might have replaced it.
Semantics
Best Practice / Examples
In principle, @register is defined as a xs:string and can be filled arbitrarily. Please, observe the rules explained under Dev:Registers#Expansion. In brief:
- Registers that appear in codelist registers.xml should be called by the respective code. E.g. register=DB640 for the register of station codes of the Austrian Federal Railways (Dienstbehelf 640).
- Registers that do not appear in registers.xml should be called with a project code starting with an underscore. E.g. register=_SnakeOilCatalogue.
If the register you are referring to is widely employed, think about contacting us to get it included into the codelist.
Additional Information
Notes
Open Issues